Gates

Left - Bespoke lodge Style gates with a double vertical dividing bar, manufactured using either hardwood or softwood timber. these gates are hung between suitably sized posts, within a run of tongue and grooved style fencing which has been stained in a light brown Barratine wood preservative. The posts are mounted with a ball finial and cap to give a nicely finished effect.

Right - To the right is a gate we were asked to make to
section off a side passage way. the gate is made with a
light frame and clad in willow screening. A nice alternative
to standard gates, fitting in well with the existing fencing to
create a softer look.
Perhaps not ideal when you are looking for strenght and
security but in this situation a good option.

Left - A single gate made from Iroko hardwood.
This gate has been made with Tongue and Grooved
cladding in a chevron or daimond pattern giving a
different look to the more standard verticle cladding.
Iroko is a stunning looking timber and excellent for use
in gate making due to it's strenght and durability.
Not the cheapest timber to use but perfect if you want
a quality look.

Right - Tongue & grooved style, driveway gates manufactured using either hardwood or softwood timber posts. These gates are fully framed for extra strength and durability.

Hardwood gates are generally left to weather naturally or can be oiled for added protection and to bring out the natural beauty of the grain. Softwood gates can be stained or left untreated for you to decide on the finish you would like.